Safety
Near the saw handle is dais safety label to
"alert you to thrown objects and to remind
you to wear safety goggles:
,&WARNING
On the clear plastic guard is this label:
WARNING: I
TO AVOID INJURY
SHUT OFF POWER !
=
BEFORE CLEANING A
JAMMED LOWER GUARD ,,
On the bottom surface of the motor, visible
when the cutting tool is horizontal, is this
safety label alerting you to use a guard
when edge molding, and to position the
culling tool behind the fence:
(see Accessories Section)
DANGER
On the front of the yoke is dais general
safety instruction label:
,_WARNING
11
To Next Page
Loading...
