Need help?Do you have a question about the Creality CR-10 Series and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | SD Card, USB |
| Bed Temperature | Up to 100°C |
| Power Supply | 110V/220V, 360W |
| Nozzle Diameter | 0.4 mm (can be replaced with other sizes) |
| Supported Materials | PLA, ABS, PETG, TPU |
| Display | LCD |
| Frame Structure | Aluminum frame |
To Next Page
