Creality CR-10 Series Guide Book

10
1.Slicing
Insert SD card into computer with Reader.
1. Open file
2. Select file
3. Open
4. Save to TF Card
2.Printing
Insert the SD
card
Select “Print
from SD”
Select the file
to be printed
9. For the first Printing

Creality CR-10 Series Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD Card, USB
Bed Temperature	Up to 100°C
Power Supply	110V/220V, 360W
Nozzle Diameter	0.4 mm (can be replaced with other sizes)
Supported Materials	PLA, ABS, PETG, TPU
Display	LCD
Frame Structure	Aluminum frame