Creality CR-X Pro User Manual

Automatic leveling
自动调平
If you need to do automatic leveling ,you can change it in the following
interface:
如果需要自动调平，可以在以下界面中进行更改：
喷嘴离平台太近,耗材挤出不
足，甚至刮坏平台。
The nozzle is too close to the
platform,and the filament are
not extrude enough, even
scraping the platform.
耗材挤出均匀,刚好贴在平台
上。
Filament are extruded evenly,
just sticking on the platform.
喷嘴离平台太远，耗材无法
粘附在平台上。
The nozzle is too far away
from the platform, so the
consumables can not adhere
to the platform.

Creality CR-X Pro Specifications

General

Brand	Creality
Model	CR-X Pro
Category	3D Printers
Language	English