Creality Ender-3 V3 KE User Manual

5.First Printing
15
⑥ Adjust parameter configuration and click on "Slice"
⑤ Set filament type
⑦ After slicing is done, click on "LAN printing"
Note: The current interface is for reference only. As the functions are constantly upgraded, please refer to the latest firmware UI on the
official website.
⑧ Add equipment: can be added either by "scan to add"
or "manually add".
Ender-3 V3 KE Ender-3 V3 KE

Creality Ender-3 V3 KE Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1 - 0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Supported Materials	PLA, ABS, PETG, TPU
Display Screen	4.3-inch color touchscreen
Power Supply	350W
Max Nozzle Temperature	300 °C
Max Bed Temperature	110°C
Connectivity	USB
Bed Leveling	Automatic