Creality K1 Max User Manual

Tune
3. About the User Interface
SystemSystem
Network
3.3 Tune、Support
10
Note: The current interface is for reference only. Due to the continuous
upgrading of functions, it shall be subject to the latest firmware UI
published on the official website.
Support
Help
Error history
Upload Log

Creality K1 Max Specifications

General

Build Volume	300 x 300 x 300 mm
Nozzle Diameter	0.4 mm (default)
Filament Diameter	1.75 mm
Connectivity	USB, Wi-Fi, Ethernet
Bed Leveling	Automatic
Print Technology	FDM (Fused Deposition Modeling)
Nozzle Temperature (Max)	300°C
Bed Temperature (Max)	120°C
Acceleration	20000 mm/s²
Chamber Temperature (Max)	60°C
Power Supply	AC 100-240V, 50/60Hz
Printing Speed	600 mm/s
Supported Filaments	PLA, ABS, PETG, TPU
Touchscreen	Yes