Need help?Do you have a question about the Creality K1 Max and is the answer not in the manual?
General| Build Volume | 300 x 300 x 300 mm |
|---|---|
| Nozzle Diameter | 0.4 mm (default) |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Wi-Fi, Ethernet |
| Bed Leveling | Automatic |
| Print Technology | FDM (Fused Deposition Modeling) |
| Nozzle Temperature (Max) | 300°C |
| Bed Temperature (Max) | 120°C |
| Acceleration | 20000 mm/s² |
| Chamber Temperature (Max) | 60°C |
| Power Supply | AC 100-240V, 50/60Hz |
| Printing Speed | 600 mm/s |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Touchscreen | Yes |
To Next Page