Creality K1 Max User Manual

01
13
4.2 LAN Printing
⑥ Selection of LAN printing
⑦ Add a device: a. Add by scanning;→Select a device
⑦ Add a device: b. Add a device by manually entering the IP address
⑧ Device List
⑨ Device Details
4. First Printing

Creality K1 Max Specifications

General

Build Volume	300 x 300 x 300 mm
Nozzle Diameter	0.4 mm (default)
Filament Diameter	1.75 mm
Connectivity	USB, Wi-Fi, Ethernet
Bed Leveling	Automatic
Print Technology	FDM (Fused Deposition Modeling)
Nozzle Temperature (Max)	300°C
Bed Temperature (Max)	120°C
Acceleration	20000 mm/s²
Chamber Temperature (Max)	60°C
Power Supply	AC 100-240V, 50/60Hz
Printing Speed	600 mm/s
Supported Filaments	PLA, ABS, PETG, TPU
Touchscreen	Yes