Creality K1 Max - Tips and Routine Maintenance

6. Tips and Routine Maintenance
6.1 Precautions for printing
01
23
Regular maintenance for 300 hours: Please maintain the blue areas in
Figure by greasing and lubricating them at regular intervals.
Grease should only be applied to the middle part by dispensing and then
applied automatically and evenly by movement.
（Users may buy the grease themselves for machine maintenance.）
6.1.1 Lubrication and maintenance
X-axis optic axis 1
X-axis optic axis 2
Y-axis optic axis 1
Z-axis optic axis 1
Screw rod 1
Z-axis optic axis 2
Screw rod 2
Y-axis optic axis 2
Screw rod 3
Z-axis optic axis 3