Creality K1 Max - LAN Printing

01
12
4.2 LAN Printing
② Choose a language and region ③ Choose a Printer
⑤ Open the model and click on "Start Slicing" ④ Click on "Import Model" and select the model file
4. First Printing
Tips: the computer
must be in the same
local area network
as the printer
Creality Print
① Download at
(www.crealitycloud.com)
or find the software
on a USB flash drive
and install it.
Note: The current interface is for reference only. Due to the continuous upgrading of
functions, it shall be subject to the latest firmware UI published on the official website.