01
>>
>> >> >> >>
>> >>
2.3.2 Connect to the network and cloud printing (Method 1: Connect via Wi-Fi)
As shown below, please use your smartphone to select your device model and slicing:
Note: When cloud printing via the app, be sure to uncheck the PLA mode and ABS mode on the device, otherwise the app cannot control the device temperature.
1. Add device 2. Scan the QR on the device 3. Network settings 4. Connect to device Wi-Fi
5. Connect to user Wi-Fi 6. New device added 7. Find model 8. Model slicing 9. Print via a network connection
To Next Page
Loading...
