01
>> >> >> >>
>> >> >>
14
2.3.3 Connect to the network and cloud printing (Method 2: Connect via Bluetooth)
As shown below, please use your smartphone to select your device model and slicing:
Note: When cloud printing via the app, be sure to uncheck the PLA mode and ABS mode on the device, otherwise the app cannot control the device temperature.
1. Add device
5. Connect to user Wi-Fi 6. New device added 7. Find model 8. Model slicing 9. Print via a network connection
2. Search for Bluetooth device
(Turn on Bluetooth on your smartphone)
3. Add device 4. Select user Wi-Fi
To Next Page
Loading...
