50
L510023-07
Pre-Delivery Inspection
REFERENCES: • Crusader Owner’s Operation and Maintenance
Manual
• Crusader Master Engine Specifi cations Sheet
• Boat Owner’s Manual
The Pre-Delivery Inspection ensures the safety and reliability of the Crusader
product. It is necessary that the inspection procedures be performed in the order
given. Crusader recommends that the inspection be accomplished in a timely
manner, allowing time for repairs that may be necessary, prior to the boats delivery
to the customer.
The inspection is laid out in two (2) stages. Stage One is a static, pre-operational
inspection. Stage Two is an operational/sea-trial inspection. After completion of the
Pre-Delivery Inspection you will have the information necessary to accurately and
completely fi ll out the Pre-Delivery Checklist portion of the Warranty Registration
Form.
Stage 1 - Static Pre-Operational Inspection
1. Engine and Transmission Identifi cation.
(Refer to the Crusader Owner’s Operation and Maintenance Manual for Engine
and Transmission Identifi cation location.)
Locate the engine identifi cation tag and record the model and serial number in
the space provide. The Crusader model identifi cation provides you with valuable
information concerning the engine you are working on. Information includes
raw/fresh water cooling, engine rotation, engine type, drive type and function,
propeller shaft rotation, gear ratio, and ignition and fuel type. Also the engine
serial number. This information will be needed for the next step in this procedure
so you can narrow your search for Service Updates to only those associated
with the engine you are preparing to put into service.
ENGINE MODEL NO.
ENGINE SERIAL NO.
Locate the transmission identifi cation tag and record the model and serial
number in the space provide on the inspection procedure.
TRANS. MODEL NO.
TRANS. SERIAL NO.
2. Service Update Check
Once you have located the Engine and Transmission Model and Serial numbers
you need to review the Service Updates for any which may apply to the
engine(s) you are preparing for delivery.
Check Crusader Service Updates for USCG Safety Recall and product
enhancement bulletins. Correct any condition that may be discovered, before
proceeding with the Pre-Delivery Inspection Procedure. Note Service Update
number(s) in the space provided and check the compliance box.
SERVICE UPDATE #
SERVICE UPDATE(S) INSTALLED:
PORT
STBD
To Next Page
Loading...
Need help?
General
