Programming Manual 96
10.9 Bin 97
This message has a BlockID of 97 and is 28 bytes excluding the header and
epilogue. This message contains statistics for processor utilization. The
following table describes the details of this message in order.
Table 10-9 Bin 97 Message
Name Components Type Bytes Value
CPUFactor CPU utilization factor. Multiply
by 450e-06 to get percentage of
spare CPU that is available
Unsigned long 4 Positive
MissedSubFrame The total number of missed sub
frames in the navigation
message since power on
Unsigned short 2 Positive
MaxSubFramePnd Max sub frames queued Unsigned short 2 Positive
MissedAccum The total number of missed
code accumulation
measurements in the channel-
tracking loop
Unsigned short 2 Positive
MissedMeas The total number of missed
psuedorange measurements
Unsigned short 2 Positive
Spare 1 Not used at this time Unsigned long 4 Future use
Spare 2 Not used at this time Unsigned long 4 Future use
Spare 3 Not used at this time Unsigned long 4 Future use
Spare 4 Not used at this time Unsigned short 2 Future use
Spare 5 Not used at this time Unsigned short 2 Future use
10.10 Bin 98
This message has a BlockID of 98 and is 68 bytes excluding the header and
epilogue. This message contains data derived from the satellite almanacs.
The following table describes the contents of this message in order.
To Next Page
Loading...
Need help?
General
