CSI Wireless Vector Sensor Programming Manual

Programming Manual 114
• HyperTerminal – Available on all Windows 95, 98, ME, 2000 and XP. This
tool is useful as it allows you to easily configure the receiver by directly typing
commands into the terminal window. The output from the receiver is shown
simultaneously. Ensure that when using HyperTerminal that it is configured to
use the correct PC communication port, baud rate, and that the local echo
feature is on (to see what you are typing).

CSI Wireless Vector Sensor Specifications

General

Brand	CSI Wireless
Model	Vector Sensor
Category	Receiver
Language	English