360a APPLICATOR SPARE PARTS LIST
When Ordering parts, present Serial Number of 360a
RECOMMENDED TOOL
Part Number Recommended Qty Description
PE-TE6000 1 ENTRELEC WIRING TOOL
WEAR ITEMS
Part Number Recommended Qty Description
MP-200-0235 1 NIP ROLLER LIFT CAM
PM-BELT1018 1 140XLO37 NIP TO MOTOR BELT
RECOMMENDED SPARE PARTS
Part Number Recommended Qty Description
ASS-200CE-0126 1 24VDC POWER SUPPLY
MP-200-0242 or 1 5" DRIVE ROLL w/ COATING
MP-200-2242 or 1 7.5" DRIVE ROLL w/ COATING
MP-200-5242 1 10" DRIVE ROLL w/ COATING
PE-FU2070 1 5 amp FUSE
PE-SE3080 1 FIBER OPTIC LABEL SENSOR
EXTENDED SPARE PARTS
Part Number Recommended Qty Description
ASS-200-0427 1 PRODUCT DETECT W/CONNECTOR
PE-RT1000-6 1 REFLECTIVE TAPE (1" WIDE x 6" LONG)
PE-CO1020 1 214-3508 16/3 X 10' POWER CORD (BELDEN)
MP-DR1007 1 STEPPER MOTOR CONTROLLER
MP-IN1013 1 APPLICATOR TOUCH SCREEN
ASS-200A-1034 or 1 STEPPER MOTOR (BLACK) - 5 amp
ASS-200A-1036 1
HIGH TORQUE STEPPER MOTOR (Burgandy) - 10 amp
PM-BE1230 1 EW-5/8 LIFT THRUST WASHER
PM-BE1232 1 EW-3/4 REWIND CLUTCH THRUST WASHER
ASS-200-0128R or 1 REWIND BEARING BLOCK ASSEMBLY W/ SHAFT
ASS-200-0128L 1 REWIND BEARING BLOCK ASSEMBLY W/ SHAFT
SAS-200-0129O 1 OUTSIDE DRIVE ROLL SUPPORT ASSEMBLY
SAS-200-0129I 1 INSIDE DRIVE ROLL SUPPORT ASSEMBLY
ASS-200-0130 or
1 5" NIP ROLLER ASSEMBLY WITH SHAFT
ASS-200-2130 or
1 7.5" NIP ROLLER ASSEMBLY WITH SHAFT
ASS-200-5130 1 10" NIP ROLLER ASSEMBLY WITH SHAFT
SAS-200-0135 or
1 5" TENSION ROLLER ASSEMBLY w/o SHAFT
SAS-200-2135 or
1 7.5" TENSION ROLLER ASSEMBLY w/o SHAFT
SAS-200-5135 1 10" TENSION ROLLER ASSEMBLY w/o SHAFT
PE-FAN1115 1 REPLACEMENT FAN FILTER
360a Series Core Unit Spare Parts List
To Next Page
Loading...
