EC DECLARATION OF CONFORMITY
Declaration: The listed product fulfils all the relevant provisions of the following Directive:
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on
the approximation of the laws of the Member States relating to Machinery
Manufacturer: CTM LABELING SYSTEMS
1318 Quaker Circle, Salem, Ohio 44460 USA
Machine Name: 360a Series Label Applicator
Model Number: 360a
Serial Number: 360a-CE-0101-0809
Drawing Identification: ASS-200CE-0401, 1 Sheet, Rev. 6, Dated; 03-Mar-2008
Standards Used:
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction
EN ISO 14120:2015 Safety of machinery – Guards – General requirements for the design and construction
of fixed and movable guards
EN 1037:1995 +A1:2008 Safety of Machinery – Prevention of unexpected startup
EN ISO 13849-1:2015 Safety of machinery - Safety related parts of control systems – Part 1: General
principles for design
EN ISO 13850:2008 Safety of Machinery – Emergency stop equipment, functional aspects – Principles for
design
EN ISO 13857:2015 Safety of Machinery – Safety distances to prevent danger zones from being reached
by upper and lower limbs
EN ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for
design and selection
EN 60204-1:2006 Safety of machinery – Electrical equipment of machines, Part 1: General requirements
+A1:2009
Means of Conformity: Technical File (TF): MS4581
Compiler of TF: Safenet Ltd., UK Notified Body Number 1674, Denford Garage, Denford, Kettering,
Northants.,
NN14 4EQ United Kingdom
Other Directives met: Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014
on the harmonisation of the laws of the Member States relating to electromagnetic
compatibility (recast)
Signature: ____________________________________ Date: __________________________
CTM LABELING SYSTEMS
1318 Quaker Circle, Salem, Ohio 44460 USA
To Next Page
Loading...
