360a APPLICATOR SPARE PARTS LIST
When Ordering parts, present Serial Number of 360a
WEAR ITEM
Part Number Recommended Qty Description
PM-T1010 or
1 UHMW TAPE FOR 5" PEEL EDGE (6" Wide x 4" Lg.)
PM-T1015 1 UHMW TAPE FOR 7.5" PEEL EDGE (8" Wide x 4" Lg.)
ASS-211-0113 or 1 AIR TUBE ASSEMBLY
ASS-211-0113E 1 AIR TUBE ASSEMBLY FOR EXTENDED BLOW BOX
ASS-215-0110X-X or 1 5" WIPER ASSEMBLY (specify length & material)
ASS-215-2110X-X or 1 7.5" WIPER ASSEMBLY (specify length & material)
ASS-215-5110X-X 1 10" WIPER ASSEMBLY (specify length & material)
RECOMMENDED SPARE PARTS
Part Number Recommended Qty Description
MP-211-0217-7 1
AIR ASSIST TUBE **THIS IS JOB SPECIFIC**
ASS-211-0103 or
1 AIR TUBE MANIFOLD ASSEMBLY
ASS-211-0103E 1 AIR TUBE MANIFOLD ASSEMBLY FOR EXT. BLOW BOX
EXTENDED SPARE PARTS
Part Number Recommended Qty Description
PM-FIL1010 1 WATTS FILTER
PM-VA2395M 1 5.4 WATT DC SOLENOID
PM-VA2396M 1 60 PSI AIR ASSIST REGULATOR
PM-VA2397M 1 120 PSI TAMP/BLOW REGULATOR
ASS-211-0106M 1 AIR BLOW 2-STATION VALVE BANK ASSEMBLY
ASS-211-0109 1 AIR FILTER REGULATOR ASSEMBLY
AIR BLOW SPARE PARTS LIST
To Next Page
Loading...
