EasyManuals Logo

Cub Cadet RZT-S Professional Shop Manual

Cub Cadet RZT-S
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
RZT-S
124
Oil change
The oil change interval is every 100 hrs.
NOTE: The first oil change should be preformed at 8 hours.
To change the oil:
1. Place a suitable drain pan under the rear of the
mower.
2. Remove the plug from the oil drain. See Figure 8.7.
3. Remove the dipstick.
4. After all of the oil has been drained, re-install the oil
drain plug.
5. Fill engine with new oil. Use a good quality motor oil
that meets the specifications recommended by
engine manufacturer.
NOTE: Refer to the oil chart to determine the proper
weight of oil to use.
6. Check the dip stick to verify that the oil is at the
proper level before returning to service.
7. Dispose of waste oil in a safe, responsible and legal
manner.
Engine Oil Capacity
Oil filter was not removed 1.7 US qt. (1.6L)
Oil filter was removed 1.9 US qt. (1.8L)
Figure 8.7
Oil drain
6$(
6$(
6$(:6$(:
6$(:
)
) ) ) ) ) )
&
&
&
& &
&
&
Oil Chart
www.mymowerparts.com
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

Table of Contents

Other manuals for Cub Cadet RZT-S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet RZT-S and is the answer not in the manual?

Cub Cadet RZT-S Specifications

General IconGeneral
Turning RadiusZero-Turn
Deck MaterialSteel
EngineKohler
Horsepower22 HP
Cutting Width50 in
TransmissionHydrostatic
Fuel Capacity3.5 gal
Speed7 mph
Weight600 lbs

Related product manuals