Cub Cadet RZT-S Professional Shop Manual

RZT-S
6
Fuel System
Fuel tank removal/replacement
Remove/replace the fuel tank by following these steps:
1. Remove the left fender:
1a. Remove the two screws, indicated by the
arrows in Figure 2.3, from the underside of the
fender using a 3/8” wrench.
NOTE: The left rear wheel was removed for a clear
view of the screws.
1b. Remove the two screws, indicated by the
arrows in Figure 2.4, from the inboard side of
the fender using a T-27 torx driver.
Figure 2.3
! CAUTION! CAUTION
Gasoline and its vapors are
extremely flammable. Use com-
mon sense when working around
the fuel system.
Figure 2.4
www.mymowerparts.com
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

Cub Cadet RZT-S Specifications

General

Turning Radius	Zero-Turn
Deck Material	Steel
Engine	Kohler
Horsepower	22 HP
Cutting Width	50 in
Transmission	Hydrostatic
Fuel Capacity	3.5 gal
Speed	7 mph
Weight	600 lbs