6
IMPORTANT SAFETY INFORMATION
6DIHW\6\PEROVDQG'H¿QLWLRQV
Hot Surface Hazard: A hot surface is accessible in the vicinity of this sign or at the build pad and printjet; avoid contact.
Hot surfaces can cause severe burns.
Caution: Indicates something may happen that could cause loss of data, damage to equipment, or personal injury.
Safety Guidelines
To ensure personal safety, follow these general safety guidelines when operating the Cube.
Follow all safety rules in this section and observe all cautions and warnings in this guide.
'RQRWPRGLI\DQ\VDIHW\IHDWXUHVRUPDNHPRGL¿FDWLRQVWRWKH&XEH'RLQJVRLVSURKLELWHGDQGYRLGVZDUUDQW\
Use of print materials, or 3D prints other than genuine 3D Systems® components may void warranty.
Adult supervision is required; observe children closely and intervene as necessary to prevent potential safety
problems and ensure the Cube’s appropriate use. Ensure small 3D prints are not accessible to young children.
These 3D prints are potential choking hazards for young children.
When the Cube is operating, the print tip on the printjet and the print pad become hot; avoid touching these areas
until they have cooled down.
Do not change color of material during printing; doing so may damage the Cube.
3
To Next Page
Loading...
Need help?
General