CUH SDMC20-S User Manual

CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH
6
PE
S
red
brown
green
black
white
Motor Wiring Instructions
Output Cable
Motor Common Terminal
Motor Main Winding
Motor Auxiliary Winding
Speed Feedback Wire
Speed Feedback Wire
Variable Speed Motor
Main Winding
Auxiliary Winding
Speedometer
yellow-green
3.3 Install and Use
Step One:
Open the packing box and check the controller and all accessories.
Refer to the motor wiring instructions to connect the motor correctly.
Step Two:
1. Make sure that the output line of the controller is correctly and reliably
connected to the motor before powering on.
2. It is forbidden to connect piezoelectric loads to the power output, otherwise it
may cause an electric shock safety accident!
Note
SDMC20-S
SDMC20_SMS-EN_2.01
Digital Single Phase Asynchronous Motor Controller
2023-11

CUH SDMC20-S Specifications

General

Brand	CUH
Model	SDMC20-S
Category	Controller
Language	English