EasyManuals Logo

Cuisinart CH4DCE User Manual

Cuisinart CH4DCE
Go to English
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
14
to avoid injury from over owing, sudden steaming and
splattering. In order to avoid scalds from steam it may be
advisable to process smaller quantities on a low speed.
Always inspect the appliance and appliance accessories
before use for noticeable signs of damage. Do not use if
damaged, or if the appliance has been dropped.
Never pull the plug out of the mains socket by the supply
cord.
Do not wrap the supply cord around the main body of the
appliance during or after use.
Always ensure the voltage to be used corresponds with the
voltage on the appliance; this is indicated on the bottom of
the housing.
Do not leave the supply cord hanging over the edge of a
kitchen table or worktop.
• Avoid contact between the supply cord and hot surfaces.
Always ensure that your hands are dry before removing the
plug from the mains outlet.
Never place the blade or disc directly on the motor of the
housing base. Always ensure the correctly associated work
bowl is in place.
• Always carefully insert the blade before adding the ingredients.
Keep hands, spatulas and other utensils away from moving
blades or discs whilst the appliance is in operation. A plastic
spatula may be used, but only when the food processor
motor is stopped.
Never push food down by hand when slicing or shredding.
Always use a pusher.
Make sure the motor has completely stopped before removing
the lid.
Always remove the bowl from the motor base very carefully
before removing the blade.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cuisinart CH4DCE and is the answer not in the manual?

Cuisinart CH4DCE Specifications

General IconGeneral
BrandCuisinart
ModelCH4DCE
CategoryFood Processor
LanguageEnglish

Related product manuals