Power Specifications
Power Requirements
• Voltage operating range: 105-130 VAC or 198-253 VAC, manual switching
• Frequency: 50/60 Hz
• Electrical supply circuit: The customer must provide a single-phase, dedicated power line that
meets the machine’s power rating(s). Use a properly grounded circuit breaker in compliance with
applicable local electrical code.
Power Rating(s)
• Full load amps (FLA): .6A/.3A
Power disruptions and fluctuations causing input voltage other than listed in power requirements
can lead to improper operation of this device, damage to electrical components, and failure. Such
occurrences are not covered under the machine warranty or preventative maintenance agreement for this
device. Power conditioning/stabilizing devices are available for purchase from Cummins-Allison Corp.
High voltage inside. Risk of electric shock.
Turn power
and unplug power cord from machine before cleaning.
Do not attempt repairs. Repairs must be made by authorized Cummins-Allison
Corp. personnel.
Plug three-prong grounded plug (supplied) into properly grounded three-prong
outlet.
Read and understand all instructions before use.
Improper voltage levels can cause equipment malfunction, damage electrical
components, and void warranty.
Provide separate circuit serving only this device to ensure proper operation.
Follow listed power requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
To Next Page
Loading...