CUMMINS ALLISON JetCount 4021 - Model 4021, 4022 Control Panels; Key Explanations for Specific Models

JetCount
®
Currency Counter All Models
6
Model 4021, 4022 Control Panel
Key Explanation
Key
Description
RESET
This key is used when clearing counts and to restart the machine after a stopping
condition.
DENSITY
This key is used for setting doubles detection sensitivity by denomination.
STRAP
This key is used for setting a Strap Limit at any preset value (5, 10, 20, 25, 50,
75, 100 or infinity). This key is also used to set strap values at levels other than
the preset values (i.e., 53, 79, etc.)
SD
This key is used to activate suspect document detection and set sensitivity by
denomination.
SPEED
This key is used to set speed at
*
(low),
**
(medium) or
***
(high).
ADD
This key is used for accumulating a total even after notes have been removed
from the stacker. When disabled, totals clear each time the stacker is emptied.
Strap Density Denomination
Add SD
Count Speed
RESET DNSTY STRAP
SD SPEED ADD