© 2012 Cummins-Allison Corp.
Glossary
Safety Messages and Advisories
Warning indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
Caution indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
Notice is used to address practices not related to physical injury. In this manual,
notice indicates a situation which, if not avoided, could result in property
damage.
Stop highlights a situation where an incorrect action or sequence of actions
could lead to lost or inaccurate data, operation in an incorrect mode, or
unintended outcomes in machine function.
Note highlights information that is interesting or useful to know after
completing a procedure.
Terms
Batch
Documents processed as an overall group. Documents will be recorded as
coming from one general source.
Chains
A condition that occurs when two or more documents run through the JetCount
reading mechanism without proper spacing.
Count Processing
(COUNT) Mode
Counts any currency, food stamps, coupons, etc., that fit the hopper size.
Operates like any other currency counter in that it is only counting “slips of
paper” (no currency scanning takes place).
Currency Processing
(VALUE) Mode
The
or
Direct Access Denomination keys
permit setting the JetCount so
that each note passing through the machine is counted as if it were a specific
value of currency.
Default
Conditions of operation that are either established during the setup process
(which remain unchanged until reset) or have been incorporated into JetCount
during manufacturing (to which the machine returns each time it is turned
,
then
).
Display
The Vacuum Fluorescent Display screen on the front of the machine reports the
operating status.
Doubles
A condition that occurs when two documents pass through the JetCount reading
mechanism simultaneously — stacked one on top of the other. The machine will
stop when this condition occurs.
To Next Page
Loading...
