Curtis 1243GEN2 Manual
A-5
APPENDIX A: EMC & ESD DESIGN CONSIDERATIONS
B-2
APPENDIX B: 1311 PROGRAMMER
The bookmark keys allow you to quickly go back to up to three selected
items without having to navigate back through the menu structure. To set a
bookmark, press one of the bookmark keys for about three seconds, until the
Bookmark Set screen is displayed. To jump to a set bookmark location, quickly
press the appropriate bookmark key (1, 2, or 3). Note that the bookmarks are
not permanently stored in the programmer. They are cleared when the pro-
grammer is unplugged.
The bookmark keys can be used to make parameter adjustment easier. For
example, in adjusting the throttle deadband, you might set a bookmark at the
Throttle % readout [Monitor > THROTTLE %] and another at the Throttle
Deadband parameter [Program > THROTTLE DB]; this way you can easily toggle
between the readout and the parameter.
1311 PROGRAMMER MENUS
There are six main menus, which in turn lead to nested submenus:
Program
— provides access to the individual programmable parameters (see
page 65).
Monitor
— presents real-time values during vehicle operation (see page 69).
Faults
— presents diagnostic information on active system faults (see page 70),
and also provides access to the fault history file and a means to clear the fault
history file.
Functions
— provides access to the controller-cloning commands (see page 52)
and to the “reset” command.
Information
— displays data about the host controller: model and serial numbers,
date of manufacture, hardware and software versions, and itemization of other
devices that may be associated with the controller’s operation.
Programmer Setup
— displays data about the programmer: model and serial
numbers, date of manufacture, hardware and software versions, and a list of the
programmable parameters that can be accessed with this particular programmer.
To Next Page
Loading...
Need help?
General
