Mar 2017 Page 60
© Penny & Giles Aerospace Ltd. No part of this work may be reproduced or distributed by any
means without prior permission in writing from the copyright owner.
DATA ACQUISITION FLIGHT RECORDER Type D51615-202-XXX or D51615-
202-XXX-090- with CCU Type D51616-XXXX and CAM Type D51623-XXXX
Installation and Operating Manual with Illustrated Parts
List
Commercial in Confidence
PIM434-I
6.7 CVR REPLAY
CAUTION:
DAFR TYPE D51615-202-XXX CONTAINS
ELECTROSTATIC SENSITIVE DEVICES. EITHER CARRY
OUT COMPANY PROCEDURES OR REFER TO BS IEC
61340-5-1:2007.
NOTES:
1. This procedure must be performed by suitably
qualified personnel.
2. The applicable Regulatory Authority may require
this procedure to be carried out by an approved
Replay Centre.
3. Confidentiality of the recording must be
preserved.
4. This procedure has to be performed with the DAFR
removed from the aircraft.
6.7.1 Equipment Required
The following equipment is required to carry out the check:
(1) Pentium IV 2.4 GHz PC, IBM or compatible, with the
following minimum specification:
(a) 10Base-T/100Base-Tx Ethernet Interface
(b) 1 Gbyte RAM.
(c) 250 Mbytes minimum free disk space (after
program installation).
(d) CD R/W ROM drive.
(e) Display adapter, ATI or NVIDIA based (mandatory
for 3D replay), DirectX9 compatible, 256MB, 1,024
x 768 resolution.
(f) 80 GB storage capacity.
(g) Soundcard and driver software.
(2) Microsoft Windows XP.
(3) Internet Explorer 6 or later.
To Next Page
Loading...
Need help?
General