Custom Audio Electronics KPM 216 H - Page 71

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM216H
373-
}{SG
[Name] Reading number of cuts performed from the printer
[Format] ASCII GS { }
Hex 1D E2
Decimal 29 226
[Description] Reading the number of cuts performed from the printer.
The command return a string that points out how many cuts are performed
by the printer, for example if there are performed 2376 cuts, it will be:
‘2376 cuts’
[Notes]
[Default]
[Reference]
[Example]
}{SG
[Name] Reading of length (cm) of printed paper
[Format] ASCII GS { }
Hex 1D E3
Decimal 29 227
[Description] Reading of length (cm) of printed paper.
The command return a string pointing out how much paper is printed, for
example if the printer has print about 2515,5 m, it will be:
‘251550cm’
[Notes]
[Default]
[Reference]
[Example]
}{SG
[Name] Reading number of retracting
[Format] ASCII GS { }
Hex 1D E4
Decimal 29 228
[Description] Reading number of retracting of the printer.
[Notes] • The command return a string pointing out the number of retracting of the
printer, for example if the printer has retracted the paper 512 times, it will
be:
‘512ret’
[Default]
[Reference]
[Example]