Custom Audio Electronics KPM 216 H - Page 73

3. PRINTER FUNCTIONS3. PRINTER FUNCTIONS
KPM216H
393-
[Description] Sets notch distance in mm from the beginning of the document (see fig.
1.4).
[Notes] • This value is expressed as [(nH x 256)+nL]
• The maximum value is 999 mm
[Default] nH = 0x00, nL = 0x00
[Reference]
[Example]
n-SG
[Name] Set printing speed
[Format] ASCII GS - n
Hex 1D F0 n
Decimal 29 240 n
[Range] 0 ≤ n ≤ 2
[Description] Sets printing speed.
n specifies the printing speed as follows:
nrPi deepsgnitn
0woL
1lamroN
2hgiH
[Notes] • Printing speed reverts to the default value when the printer is reset or
turned off.
[Default] n = 1
[Reference]
[Example]
6F$D1$
[Name] Ticket align at the first printing line
[Format] ASCII GS { }
Hex 1D F6
Decimal 29 246
[Description] This command searchs a paper notch and then align the ticket at the first
printing line.
[Notes]
[Reference] $1D $F8
[Example]