POWER SUPPLY INFORMATION
The device is fed by a SELV power supply (Safety Extra Low
Voltage).
When power supply unit is installed as accessory in the end-
product, the following items must be considered:
The power supply must be properly bonded to the main protec-
tive earthing termination.
provided.
The power supply has been evaluated for use in a pollution
degree 2 environment, overvoltage category II.
An appropriate disconnect device must be provided.
The power supply must be installed in compliance with the
mounting, creepage, clearance, markings and segregation re-
quirements of the end-use application.
WARNING: PRESENCE OF DANGEROUS VOLTAGES (POWER
SUPPLY)
Risk of electric shock (accessory power supply).
WARNING: PRESENCE OF HAZARDOUS MOVING PARTS
To Next Page
Loading...
Need help?
General
