Custom Audio Electronics KPM180H - Page 82

Head life
(2)
100 Km / 100M pulse
Printing width 80 mm
Printing mode Normal, 90°, 180°, 270°
Printing format Height/Width from 1 to 8, bold, reverse, underlined, italic
Character fonts
CUSTOM/POS emulation
54 character code tables (see par. 7.8)
2 TrueType font
(3)
, extended chinese GB18030-2000
SVELTA emulation 20 embedded fonts, 2 TrueType font
(3)
Printable barcode
UPCA, UPCE, EAN13, EAN8, CODE39, ITF, CODABAR, CODE93,
CODE128, CODE32, PDF417, DATAMATRIX, AZTEC, QRCODE
Printing speed
(2) (4)
200dpi models
High Speed = 200 mm/sec
Normal = 150 mm/sec
High Quality = 100 mm/sec
300dpi models
High Speed = 150 mm/sec
Normal = 120 mm/sec
High Quality = 90 mm/sec
PAPER
Type of paper
Thermal rolls, heat-sensitive side on outside of roll
Thermal rolls, heat-sensitive side on inside of roll
Thermal fanfold module with alignment notch
Paper width from 20 mm to 82.5 mm (2 mm step)
Paper weight from 70 g/m
2
to 255 g/m
2
Paper thickness 
Recommended types of paper
KANZAN KF50 and KP460
MITSUBISHI PG5075 and TL4000
External roll diameter
(5)
max. 200 mm
External roll core diameter 25 mm (+ 1mm)
Paper end Not attached to roll core
82