USB VIRTUAL COM
Disabled
D
= Virtual COM disabled
Enabled = Virtual COM enabled
NOTE:
ATB RePrint after ERR This parameter enables/disables the automatic reprint of a ticket stopped due to a paper
jam or a paper end
Disabled
D
= reprint disabled
Enabled = reprint enabled
NOTE:
This parameter is printed only with ATB emulation enabled.
NEAR PAPER END Setting of the low paper detection:
Disabled
D
= detection disabled
Enabled = detection enabled
CASING TYPE Type of device casing:
Plastic
D
= plastic casing
Metal = metallic casing
NOTE:
The parameter is printed only for TK180 models.
PRINTHEAD TEST
POWERON
Setting of the performing of the print head test:
Disabled
D
= the test is performed only during the printing of the setup report
Enabled = the test is performed at each power on
66
To Next Page
Loading...
Need help?
General
