Custom Audio Electronics TK180 - Page 80

Printing method 
Head life
(2)
Abrasion resistance
(3)
100 km (with recommended paper)
Pulse durability 100 M (12.5% duty cycle)
Printable barcode
UPCA, UPCE, EAN13, EAN8, CODE39, ITF,
CODABAR, CODE93, CODE128, CODE32,
PDF417, DATAMATRIX, AZTEC, QRCODE
Printing speed
(2) (4)
200dpi models
High Speed = 200 mm/sec
Normal = 150 mm/sec
High Quality = 100 mm/sec
300dpi models
High Speed = 150 mm/sec
Normal = 120 mm/sec
High Quality = 90 mm/sec
PAPER
Type of paper
Thermal rolls, heat-sensitive side on outside of roll
Thermal rolls, heat-sensitive side on inside of roll
Thermal fanfold module
Paper width


Paper weight 
Paper thickness 
External roll diameter
(5)
max. 200 mm
External roll core diameter 25 mm (+ 1mm)
Paper end Not attached to roll core
Core type Cardboard or plastic
CUTTER (models with presenter)
Paper cut Total
Estimated life
(2)
1 000 000 cutter number
80