DEVICE ELECTRICAL SPECIFICATIONS
Power supply 24 Vdc ±10% (optional external power supply)
Medium consumption
(6)
1.6 A
Typical consumption
(4)
1.5 A
Stand-by consumption
200dpi models 0.04 A
300dpi models 0.06 A
ELECTRICAL SPECIFICATIONS POWER SUPPLY cod.963GE020000003
Power supply voltage from 100 Vac to 240 Vac
Frequency from 50 Hz to 60 Hz
Current (output) 2.5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from -10°C to +60°C
Relative humidity from 10% Rh to 85% Rh
Storage temperature from -20 °C to +70 °C
Storage relative humidity from 10% Rh to 90% Rh
NOTES:
(1) : Control board.
(2) : Respecting the regular schedule of cleaning for the device components.
(3) : Damages caused by scratches, ESD and electromigration are excluded.
(4) : Referred to a standard CUSTOM receipt (L=10cm, Density = 12,5% dots on).
(5) : For external rolls diameter larger than Ø100mm it’s recommended to use a paper pretensioning device.
(6) : Referred to the UL measurements (Speed/Quality = High Speed, Print density = +50%, Ticket = 12.5% dot on,
1 ticket every 30 sec.).
81
To Next Page
Loading...
Need help?
General
