Medium consumption
(7)
TL60 STD, TL60 EJ 1.8 A
TL80 STD 2.2 A
Typical consumption
(5)
TL60 STD, TL60 EJ 0.65 A
TL80 STD 0.8 A
Standby consumption 0.05 A
ELECTRICAL SPECIFICATIONS POWER SUPPLY cod. 963GE020000046 (OPTIONAL)
Power supply voltage from 100 Vac to 240 Vac
Frequency from 50 Hz to 60 Hz
Output 24V, 2.5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from -20°C to +70°C
Relative humidity from 10% Rh to 80% Rh
Storage temperature from -20 °C to +70 °C
Storage relative humidity from 10% Rh to 90% Rh
NOTES:
(1) : Control board.
(2) : Respecting the regular schedule of cleaning for the device components.
(3) : Damages caused by scratches, ESD and electromigration are excluded.
(4) : For further information, refer to the commands manual for the chinese font management.
(5) : Referred to a standard CUSTOM receipt (L=10cm, Density = 12,5% dots on).
(6) : In the case of a printing length of less than 40 mm, the printer automatically corrects the length to 40 mm.
(7) : Referred to the UL measurements (L = 10cm, Density = 50% dot on, Print density = +50%).
70
To Next Page
Loading...