5.3 Printer status
Printer operating status is indicated in the confi guration print-out in which, next to the name of the components dis-
played, the following information is given:
PRINTER TYPE the device model.
Barcode Reader the presence of the barcode reader.
RFID module the presence of the RFID reader/writer.
PRINTING HEAD TYPE the printing head model.
INTERFACE the interface present.
PROGRAM MEMORY TEST the message OK appears if functioning and NOT OK if faulty.
DYNAMIC RAM TEST the message OK appears if functioning and NOT OK if faulty.
EEPROM TEST the message OK appears if functioning and NOT OK if faulty.
CUTTER TEST the message OK appears if functioning and NOT OK if faulty.
PRINTER HEAD Rav the resistance of a dot head.
HEAD VOLTAGE the voltage of the head.
HEAD TEMPERATURE the temperature of the head.
POWER ON COUNTER the number of power-ups made.
PAPER PRINTED the number of centimeters of paper printed.
CUT COUNTER the number of cuts made.
DATE - TIME the date / time of the device.
5. CONFIGURATION
User manual KPM150H-AERO 59
To Next Page
Loading...
