Custom Engineering B202H - Line Feed Key

LF FF
LINE FEED
KEY
3
Press the LINE FEED key to enter the configuration mode.
4
Proceed with the configuration by using the keys according the functions printed on paper (see paragraphs 2.5
and 2.6). For description and values of setup parameters, see the following paragraphs.
2
The device prints a SETUP report.
PRINTER
S
ETTIN
GS
PRINTER TYPE .................................KPM1
50H
Barcode Reader.................................Not prese
nt
RFID Module ......................................Not present
PRINTING HEAD TYPE.....................SHECT56
INTERFACE .......................................RS232
PROGRAM MEMORY TEST.............
.OK
K
DYNAMIC RAM
TEST
ST
....
....
...
....
....
..
....
....
OK
OK
KPM150H AERO ST
SCODE: < code > - rel 1.00
BCODE: < code > - rel 1.00
FCODE: < code > - rel 1.00
mCODE: < code > - rel 1.00
UCODE: < code > - rel 1.00
DCODE: < code > - rel 2.00
CPLD - rel 1.10
[LF]
to modify parameter
[FF]
for next parameter
Printer Emulation.......... :
SER
VIC
E
E
5. CONFIGURATION
56 KPM150H-AERO User manual