7 SPECIFICATIONS
7.1 Hardware specifi cations
GENERAL
Sensors
Ticket presence, head temperature, notch detector,
translucent gap/hole detector (setting by software),
ticket presence on output, cover open, external near paper end
MTBF
(1)
89 165 hours
Emulations SERVICE, BTP
INTERFACES
USB connector 12 Mbit/sec
RS232 serial connector from 1200 to 115200 bps
MEMORIES
Receive buffer 64 Kbytes
Flash memory 32 Mbytes
PRINTER
Resolution 203 dpi (8 dot/mm)
Printing method Thermal, fi xed head
Head life
(2)
100 Km / 100M pulses
Printable Barcode
Interleaved 2 of 5, Industrial 2 of 5, CODE39, CODE128,
Interleaved 2 of 5 including check-digit,
Industrial 2of 5 including check-digit,
CODE39 including check-digit,
CODE128 including check-digit
EAN13 including check-digit
PDF417, DATAMATRIX, AZTEC, QRCODE
Printing speed
(2)
(3)
High quality = 80 mm/sec
Normal = 117 mm/sec
High speed = 167 mm/sec
PAPER
Type of paper
KPM150H
Thermal rolls, heat-sensitive side on outside of roll
Fan Fold thermal paper
B202H Fan Fold thermal paper
Paper width 54mm (according to IATA BTP specifi cations - resolution 740)
Paper weight according to IATA specifi cations
Paper thickness according to IATA specifi cations
External roll diameter
(4)
max Ø200 mm
7. SPECIFICATIONS
User manual KPM150H-AERO 81
To Next Page
Loading...
