6.2 Planning of cleaning operations
The regular cleaning of the device keeps the print quality and extends its life. The following table shows the recom-
mended planning for the cleaning operations.
EVERY PAPER CHANGE
Printing head Use isopropyl alcohol
Printing roll Use isopropyl alcohol
EVERY 5 PAPER CHANGES
Cutter Use compressed air
Paper path Use compressed air or tweezers
Sensors Use compressed air
EVERY 6 MONTHS OR AS NEEDED
Case Use compressed air or a soft cloth
For specifi c procedures, see the following pages.
NOTE:
If you use the device in dusty environments, you must reduce the intervals between the cleaning operations.
NOTE:
For ease of reference, in the following pages, for some models is represented only the printer group without the
external plastic chassis.
6. MAINTENANCE
User manual KPM150H-AERO 71
To Next Page
Loading...
