CYBEX 525T Service Manual

2. Unplug the treadmill from the power outlet.
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
Qty.DescriptionItem
1Right end cap1
2Screws2
2. Repeat step for left end cap.
Remove top steps
1. Remove the five screw covers from the right top step using a flat head screwdriver.
Qty.DescriptionItem
5Screw cover1
5Screw2
5Screw cover base3
1Top step, right4
2. Remove the five screws and five screw cover bases securing the right top step using a Phillips
screwdriver.
3. Repeat steps for the left top step.
Page 108 of 199
Cybex 525T Treadmill Part Number

CYBEX 525T Specifications

General

Brand	CYBEX
Model	525T
Category	Treadmill
Language	English