CYBEX 770T Service Manual

2. Set A/V Device to Wireless TV.
3. Assign a TV channel number to each transmitter on the console.
Determine transmitter type
UHF transmitters have TV's identified by number. Example TV1.
UHF Transmitters
Determine which transmitter is used in your facility.
806 MHz System863 MHz System900 MHz System
J1 806 Japan 14 channelsM 863 MYEM 900 MYE
J2 806 Japan 30 channelsE 863 EnerciseC 900 Cardio Theater
A 863 AudeonE 900 Enercise
B 900 Broadcast Vision
Setup UHF Transmitters
For transmitter types 900 MHz, 863 MHz or 806 MHz. Use this procedure to associate channel numbers
to your TV transmitters.
Pick transmitter type
For transmitter types 900 MHz, 863 MHz or 806 MHz. Use this procedure to associate channel numbers
to your TV transmitters.
Pick transmitter type
1. Tap Setup at the main Toolbox screen.
2.
Tap the Shift Right icon to navigate to the A/V Config icon.
3. Tap A/V Config to enter TV Configuration.
Page 38 of 261
Cybex 770T/790T Treadmill Part Number

CYBEX 770T Specifications

General

Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0 - 15%
Running Surface	22" x 60"
Heart Rate Monitoring	Yes
Display	15" Touch Screen