CYBEX ATON 2 User Manual

WARNING!: To avoid DEATH or SERIOUS INJURY, NEVER INSTALL THIS CHILD
RESTRAINT WITH ANY OF THE FOLLOWING VEHICLE BELTS:
• A lap belt with a motorized shoulder belt
• Vehicle belts that are attached to the door in any way, or that move along a track
automatically to restrain the passenger when the door is closed
• Lap belts with an Emergency Locking Retractor (ELR).
These lap belts stay loose and can move until locking in a crash or sudden stop.
• Combination Lap/Shoulder Belt with Two ELR Retractors.
Lap-shoulder belts that have a separate non-locking retractor each for the lap
section and the shoulder section, including Inflatable Seat Belts.
• Lap belts forward of the seat crease, or bight.
Vehicle Seat Belts
The design and operation of vehicle seat belt systems vary from vehicle to vehicle and
from seating location to seating location in the same vehicle. Refer to your vehicle Owner’s
Manual for proper use, placement, and adjustment of the vehicle’s lap and shoulder
belts.
25
Vehicle Seat Location Requirements
English

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)