To review accumulated data after a program: The display automatically cycles through your
accumulated workout data during the Workout Review for 20 seconds (default setting).
Displaying Heart Rate
In order for the Cybex Pro+ to display your heart rate, you must either use a Polar compatible
heart rate transmitter belt (not included) or hold the handgrips to use Contact Heart Rate.
Contact Heart Rate — Hold the handgrips on the console crossbar until a heart rate is
displayed, typically less than thirty seconds. For best results, hold the handgrips lightly and
ensure that your hands contact both the front and back sensors of each grip. NOTE: Hold
your hands as steady as possible as movement can cause interference on the contacts.
Factors that can interfere with the heart rate signal include:
• excessive movement
• body composition
• hydration
• too loose grip
• too tight grip
• running
• excessive dirt, powder or oil
• leaning or resting on grips
NOTE: Cybex does not recommend continuous holding onto the contact heart rate grips
during exercise.
Contaminants, such as hand lotions, oils or body powder, may come off on the contact heart
rate grips. These can reduce sensitivity and interfere with the heart rate signal. Therefore,
ensure you have clean hands when using the contact heart rate.
Cybex Pro+ Treadmill Owner’s & Service Manual
Operation
Page 3-7
Heart Rate — Your current heart rate. Heart rate will appear when a signal is
introduced. Use either the handgrips for Contact Heart Rate or a Polar
compatible heart rate transmitter. See Heart Rate LED for a description of
colors.
Metabolic Equivalent — Relates to the user's energy expenditure. ‘One met’ is
the amount of oxygen consumed at rest. For example two mets would be twice
that amount. See Heart Rate in this chapter for a more detailed description.
Pace — At your current speed, how long it would take to cover a mile (or
kilometer), displayed in minutes:seconds.
To Next Page
Loading...
Need help?
General
