Cypress CapSense Express CY8CMBR3108 User Manual

CapSense Express Controllers Registers TRM, Document No. 001-91082 Rev. *E 103
SLIDER_LBR
0x71
1.5.72 SLIDER_LBR
Address = 0x71
Low baseline reset parameter configuration for slider. Refer CY8CMBR3xxx CapSense Design Guide for definition of this
parameter. This register is not applicable for parts CY8CMBR3102, CY8CMBR3108, CY8CMBR3110, CY8CMBR3116.
Address: 0x71
Bits 76543210
Host Access RW RW
Device Access RW RW
Bit Name OVERRIDE LOW_BASELINE_RESET_THRESHOLD
Bits Name Description
7 OVERRIDE Setting this parameter allows overriding of the slider low baseline reset parameter set by
SmartSense with that specified by user in the bitfield LOW_BASELINE_RESET_THRESHOLD
in this register. This bit field is not applicable for parts CY8CMBR3102, CY8CMBR3108,
CY8CMBR3110, CY8CMBR3116.
0: Slider low baseline reset threshold override disabled
1: Slider low baseline reset threshold override enabled
6 : 0 LOW_BASELINE_RESET
_THRESHOLD
Threshold value (units: counts) to apply for slider low baseline update reset threshold override.
The valid value of this bit field ranges from 0 to 127. This bit field is not applicable for parts
CY8CMBR3102, CY8CMBR3108, CY8CMBR3110, CY8CMBR3116.

Cypress CapSense Express CY8CMBR3108 Specifications

General

Brand	Cypress
Model	CapSense Express CY8CMBR3108
Category	Controller
Language	English