Cypress CapSense Express CY8CMBR3108 User Manual

CapSense Express Controllers Registers TRM, Document No. 001-91082 Rev. *E 58
BUTTON_LBR
0x1f
1.5.27 BUTTON_LBR
Address = 0x1f
Low baseline reset parameter configuration for button sensor. Refer CY8CMBR3xxx CapSense Design Guide for more
details.
Address: 0x1f
Bits 76543210
Host Access RW RW
Device Access RW RW
Bit Name OVERRIDE LOW_BASELINE_RESET_THRESHOLD
Bits Name Description
7 OVERRIDE Setting this parameter allows overriding of button low baseline reset parameter set by
SmartSense with that specified by the user in the bitfield
LOW_BASELINE_RESET_THRESHOLD in this register.
0: Button low baseline reset threshold override disabled
1: Button low baseline reset threshold override enabled
6 : 0 LOW_BASELINE_RESET
_THRESHOLD
Threshold value (units: counts) to apply for button baseline update threshold override. The valid
value of this bit field ranges from 0 to 127.

Cypress CapSense Express CY8CMBR3108 Specifications

General

Brand	Cypress
Model	CapSense Express CY8CMBR3108
Category	Controller
Language	English