CapSense Express Controllers Registers TRM, Document No. 001-91082 Rev. *E 30
FSS_EN
0x02
1.5.2 FSS_EN
Address = 0x02
This register configures inclusion of sensors in the group undergoing Flanking Sensor Suppression (FSS) processing. FSS
should only be enabled on button sensors. If a sensor is configured as proximity, guard or slider sensor, FSS_EN bits corre
-
sponding to that sensor should be set to 0.
Address: 0x02
Bits 15 14 13 12 11 10 9 8
Host Access RW RW RW RW RW RW RW RW
Device Access RW RW RW RW RW RW RW RW
Bit Name CS15 CS14 CS13 CS12 CS11 CS10 CS9 CS8
Bits 76543210
Host Access RW RW RW RW RW RW RW RW
Device Access RW RW RW RW RW RW RW RW
Bit Name CS7 CS6 CS5 CS4 CS3 CS2 CS1 CS0
Bits Name Description
15 CS15 Sensor 15 button FSS inclusion. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110.
0: Sensor button status is excluded from FSS processing
1: Sensor button status is included in FSS processing
14 CS14 Sensor 14 button FSS inclusion. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110.
0: Sensor button status is excluded from FSS processing
1: Sensor button status is included in FSS processing
13 CS13 Sensor 13 button FSS inclusion. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110.
0: Sensor button status is excluded from FSS processing
1: Sensor button status is included in FSS processing
12 CS12 Sensor 12 button FSS inclusion. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110.
0: Sensor button status is excluded from FSS processing
1: Sensor button status is included in FSS processing
11 CS11 Sensor 11 button FSS inclusion. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110.
0: Sensor button status is excluded from FSS processing
1: Sensor button status is included in FSS processing
10 CS10 Sensor 10 button FSS inclusion. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3106S, CY8CMBR3108, CY8CMBR3110.
0: Sensor button status is excluded from FSS processing
1: Sensor button status is included in FSS processing