Cypress CapSense Express CY8CMBR3108 User Manual

CapSense Express Controllers Registers TRM, Document No. 001-91082 Rev. *E 97
SLIDER1_CFG
0x61
1.5.66 SLIDER1_CFG
Address = 0x61
Slider 1 or high-resolution slider configuration. This register is not applicable for parts CY8CMBR3102, CY8CMBR3108,
CY8CMBR3110, CY8CMBR3116.
Address: 0x61
Bits 76543210
Host Access RW RW RW RW
Device Access RW RW RW RW
Bit Name RESERVED
GEOME-
TRY
SENSITIVITY SEGMENTS
Bits Name Description
7 : 6 RESERVED Reserved
5 GEOMETRY Slider 1 or high-resolution slider shape. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110, CY8CMBR3116.
0: Linear slider (linear position indication)
1: Radial slider (angular position indication)
4 : 3 SENSITIVITY Sensitivity of Slider 1 (units: counts/pF) or high-resolution slider sensors. This bit field is not ap-
plicable for parts CY8CMBR3102, CY8CMBR3108, CY8CMBR3110, CY8CMBR3116.
0: 50 counts/0.1 pF
1: 50 counts/0.2 pF
2: 50 counts/0.3 pF
3: 50 counts/0.4 pF
2 : 0 SEGMENTS Number of sensors in Slider 1. The set of enabled slider sensors are contiguous sensor indexes
SLD10, SLD11 to SLD1x (x ranges from 2 to 4). If Slider 1 is independent of Slider 2, the device
will interpret an invalid value as equivalent to the closest bound. If Slider 1 and Slider 2 are com-
bined into a single high-resolution slider, this field value is ignored, and the device automatically
enables all 5 segments of Slider 1 to be part of the high-resolution slider. The valid value of this
bit field ranges from 3 to 5. This bit field is not applicable for parts CY8CMBR3102,
CY8CMBR3108, CY8CMBR3110, CY8CMBR3116.

Cypress CapSense Express CY8CMBR3108 Specifications

General

Brand	Cypress
Model	CapSense Express CY8CMBR3108
Category	Controller
Language	English