27D-Link DAP-1350 User Manual
Section 3 - Configuration
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance.
Check the box if you do not want the SSID of your wireless network to be broadcasted by the DAP-1350. If checked, the
SSID of the DAP-1350 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your
DAP-1350 in order to connect to it.
Refer to page 107 for more information regarding the wireless security.
Enable the Wi-Fi Protected Setup feature.
Locking the wireless security settings prevents the settings from being changed by any new external user using its PIN.
Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network
settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager
user.
Shows the current value of the access point’s PIN.
Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user
interface of the user.
Restore the default PIN of the access point.
Resets Wi-Fi Protected Status to Not Configured. The Vista WPS icon will only be displayed when the Wi-Fi Protected
Status is Not Configured.
Channel Width:
Transmission Rate:
Enable Hidden
Wireless:
Security Mode:
Enable:
Lock Wireless
Security Settings:
Current PIN:
Generate New
PIN:
Reset PIN to Default:
Reset to
Unconfigured:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
