76D-Link DAP-1350 User Manual
Section 3 - Configuration
Wireless Settings
Enable Wireless:
Wireless Network
Name:
Wireless Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Transmission Rate:
Channel Width:
Visibility Status:
Wireless Security
Mode:
Select this to turn the Wi-Fi module on and off.
Use the drop-down box to select if you want to
use a schedule. Click Add New Schedule to
add or change a schedule.
Enter a wireless network name (SSID) for your
network (up to 32 characters).
Select the appropriate 802.11 mode based
on the wireless clients in your network. The
drop-down menu options are 802.11g Only,
Mixed 802.11b/g, 802.11b Only, 802.11n Only,
or Mixed 802.11b/g/n.
Check this box to have the device automatically
scan for the best available channel.
Select a wireless channel. It is recommended
to use channels 1,6, or 11. This option will
be disabled if the Auto Channel Scan box is
checked.
Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.
Select Invisible if you do not want the SSID of your wireless network to be broadcast by the DAP-1350. If Invisible is selected,
the SSID of the DAP-1350 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your
DAP-1350 in order to connect to it.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the Wireless Security section of this
manual for a detailed explanation of the wireless security options.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
